Installing SimSalaThril
Installing SimSalaThril on a golf simulator PC, pairing it with its resource in Thril, keeping it signed in, setting Windows up for sleep, and fixing a PC that does not lock, unlock, wake or install.
SimSalaThril runs on each simulator PC and locks the screen outside bookings. You install it once on every PC and pair the PC with its resource. SimSalaThril explains what the add-on does and what you need before you start.
Installing and pairing
1. Choose the settings
Open Settings → System → Integrations → SimSalaThril and choose when simulators unlock. See Unlock settings. Switch the status to Active and save. Simulators pair once the integration is active.
2. Add staff codes
Staff enter a staff code at the PC to unlock or lock it by hand. On the Access codes tab, add a Staff code for each staff member. The PC's log then shows who did what.
3. Install SimSalaThril on the simulator PC
- On the simulator PC, download the Windows installer. The Download for Windows button on the SimSalaThril settings page gives the same file.
- Run the installer. It installs for the signed-in Windows user. It asks for administrator rights when the PC needs the Microsoft .NET runtime. Have an administrator at hand for the first PC. Windows can show an "unknown publisher" warning for a downloaded installer. Select More info, then Run anyway. If Windows blocks the installer or the app outright, see Windows blocks SimSalaThril.
- SimSalaThril starts and locks the screen. A new PC shows a notice that the simulator is not set up yet.
Install it on every simulator PC. Each PC pairs with one resource.
4. Pair the PC with a resource
- In Thril, open the Simulators tab of the SimSalaThril settings and select Pair a simulator.
- Choose the resource this PC belongs to and create a pairing code. The code works once and expires soon after.
- On the simulator PC, press Ctrl+Shift+F12. The Pair this simulator window opens.
- Enter the code and select Pair.
If the top row of the keyboard runs media functions instead of F1 to F12, hold Fn as well: Ctrl+Shift+Fn+F12.
The PC now shows as Online on the Simulators tab, and bookings on that resource unlock it. Each resource has one PC, and pairing a new PC replaces the old one.
5. Keep the PC signed in
SimSalaThril starts when Windows signs in. Set the PC to sign in to the same Windows user automatically after a restart, and leave that user signed in.
6. Test it
Make a test booking on the resource that starts now. The PC unlocks within seconds. Cancel the booking or let it end, and the PC locks again after the extra time you set.
Setting up Windows for sleep
A PC set to Sleep under Idle simulators wakes itself with a Windows wake timer. Set up each simulator PC as below before you choose Sleep. The commands run in Command Prompt opened as administrator.
- Check that the PC has standard sleep. Run
powercfg /a. The available states must include Standby (S3). A PC that lists only Standby (S0 Low Power Idle) uses Modern Standby, where a wake timer cannot turn the screen on (Microsoft: Modern Standby wake sources). Use Shut down for that PC. - Allow wake timers. Run
powercfg /setacvalueindex scheme_current sub_sleep rtcwake 1and thenpowercfg /setactive scheme_current. In Power Options, the same setting is Sleep → Allow wake timers → Enable. Important Wake Timers Only lets only Windows' own timers wake the PC (Microsoft: Allow wake timers). - Wake without a password. In Settings → Accounts → Sign-in options, set If you've been away, when should Windows require you to sign in again? to Never. Windows 10 calls it Require sign-in. Windows asks for the password after sleep by default (Microsoft: Prompt for password on resume).
- Let SimSalaThril decide when the PC sleeps. In Settings → System → Power & battery → Screen, sleep, & hibernate timeouts, set the sleep time to Never (Microsoft: Power settings in Windows 11). In Windows 10 it is under System → Power & sleep.
- Keep the power on. A sleeping PC needs mains power. Leave the master power button and any timer outlet on for the simulators that sleep.
- Have the projector turn on with the picture. Turn on the projector's setting that switches it on when it gets a signal, often named Auto Power On.
- Test it. Choose Sleep with the shortest time and let a short test booking end. After the countdown, the Simulators tab shows the PC as Sleeping. Without touching the PC, make a booking that starts in 30 minutes. Before the simulator unlocks, the PC wakes and shows the lock screen, and its History lists Woke from sleep.
Managing simulators
The Simulators tab lists every paired PC and whether it is online. Open a PC to give it Unlocked hours of its own, Unpair it, or read History, which shows which code unlocked or locked the PC, and when the PC shut down, went to sleep or woke.
A PC that does not lock or unlock
- Check that the integration is Active. While it is switched off, all simulators stay locked.
- On the Simulators tab, Offline or an old last-seen time means the PC cannot reach Thril. Check its network and that SimSalaThril is running in the tray. Shut down means the PC reported that it was shutting down and has not reached Thril since. Turn it back on with the master power button. Sleeping means the PC went to sleep. See A PC that does not wake by itself.
- A PC that says the simulator is not in use was unpaired, or the integration is off. Pair it again if it was unpaired.
- A pairing code that does not work was already used or has expired. Create a new one.
- Staff can always unlock the PC with a staff code while you sort it out.
- Contact Thril support with the venue, the resource and the PC name.
A PC that does not wake by itself
A sleeping PC wakes when someone presses a key, moves the mouse or presses its power button. It then shows the lock screen and unlocks for the booking. To find out why it did not wake by itself:
- History lists Went to sleep and no Woke from sleep before the booking. Check steps 1 and 2 of Setting up Windows for sleep. After you wake the PC by hand,
powercfg /lastwakeshows what woke it, andpowercfg /waketimerslists the wake timers set while the PC is awake (Microsoft: powercfg). - History lists Woke from sleep, and the screen stayed dark. Check the projector's signal setting from step 6. If the PC's own monitor stays dark too, the PC keeps its display off after a timer wake. Use Shut down for that PC.
- The PC wakes to the Windows sign-in screen. Set step 3 of Setting up Windows for sleep.
- The booking was made shortly before it started. A sleeping PC checks for new bookings every 15 minutes, so a booking made less than that before it starts can find the PC asleep.
- The power was off. A PC that lost power while asleep starts only with its power button.
Windows blocks SimSalaThril
On some PCs, Windows Smart App Control blocks the installer or SimSalaThril and shows "Part of this app has been blocked". Smart App Control runs apps whose publisher Windows has verified, and SimSalaThril is not on its list.
To run SimSalaThril, turn Smart App Control off in Windows Security under App & browser control, then run the installer again. Microsoft's guide Smart App Control has blocked part of this app shows how to find the blocked file in Protection history.
SimSalaThril
Golf simulator PCs lock outside booked times and unlock for each booking. Customers buy extra time from the screen with a QR code, and staff and partners get their own codes.
Access control and door codes
Customers get a door code, a door link or a door button that works for the time they booked. Thril works with Thrilock and nine partner lock systems.